Mac fan loud or running hot? How to check temperatures and find the cause
A Mac that suddenly sounds like a hair dryer, or a MacBook Air that is too warm to keep on your lap, is nearly always doing work you cannot see. Fans and heat are a symptom. The job is to find which process is producing the heat, and only then to decide whether the hardware needs attention.
Find the process first
- Open Activity Monitor (Applications → Utilities) and click the CPU tab.
- Click the % CPU column so the busiest process is on top, and watch it for a minute.
- Anything that stays above 80 to 100% is your heat source. A browser tab, a video call, a stuck app and a build are the usual ones.
- Select it and press the stop button in the toolbar if it is an app you can do without, or simply quit and reopen that app.
Three system processes cause most of the mystery heat. mds and mds_stores are Spotlight indexing the disk, typical after a macOS update or after copying many files. photoanalysisd is Photos scanning your library for faces and scenes. Both finish on their own, usually within a few hours on power; they are not a fault.
On an Intel Mac, kernel_task at several hundred percent is not the cause. It is macOS deliberately taking CPU time away from apps to let the chip cool down. Look for what was hot before it started.
See what macOS thinks about the heat
Terminal can tell you whether the system is throttling. The first command shows the thermal limit macOS is applying. The second, on Apple silicon, shows the current thermal pressure level.
pmset -g therm
sudo powermetrics --samplers thermal -n 1
A CPU_Speed_Limit of 100 means no throttling. Anything lower means the Mac is slowing itself down to stay within its temperature limits. A pressure level of Nominal is fine; Moderate and Heavy mean it is working hard to shed heat.
Fixes that work
- Give it air. A MacBook on a bed or a sofa blocks the intake along the hinge and the bottom. A hard surface drops temperatures within a minute.
- Restart. It clears stuck processes, and on Apple silicon a restart is also the equivalent of the old SMC reset.
- On an Intel Mac, reset the SMC if the fans run at full speed while the machine is cool and idle. Apple's support site has the key combination for each model.
- Check the charger and the display setup. Charging and driving an external display at the same time both add heat, on the left side of many MacBooks especially.
- Update macOS and the app that is misbehaving. Runaway helper processes are a common bug and are often fixed in the next release.
- Clean the vents. After a few years dust blocks the fan intake on any Mac that has a fan. If you are not comfortable opening the case, a service shop does it in minutes.
A MacBook Air with Apple silicon has no fan at all. It gets warm by design and slows itself down when it needs to, so a warm case with no noise is normal there.
When it is the hardware
Suspect the hardware when the fans are loud with nothing busy in Activity Monitor, when one fan reads zero, or when the Mac shuts down under load. Run Apple Diagnostics: on Apple silicon hold the power button at start-up until the options screen appears, then press Command-D; on Intel hold D while starting up. A reference code that begins with PPF points at a fan.
See every sensor at once
macOS does not show temperatures or fan speeds anywhere in its own apps. Sensor Doctor is our Mac app for that: it reads the temperature sensors and the fans straight from the hardware, with live charts, shows the chip temperature in the menu bar, and its one-click Health Check gives a plain verdict with what to do next. It makes the difference between "it feels hot" and "the SSD sits at 68 degrees while the fans are at their minimum" visible in a few seconds.