macOSDrivesTroubleshooting6 min

USB drive not showing up on a Mac? Eight checks, in the right order

You plug in a drive and nothing happens: no icon on the desktop, nothing in the Finder sidebar. In most cases the Mac does see the drive and is only not showing or not mounting it. Work through these checks in order; each one takes under a minute and tells you where the problem sits.

1. Make sure Finder is allowed to show it

Open Finder → Settings. Under General tick "External disks" to show drives on the desktop, and under Sidebar tick "External disks" in the Locations list. This setting is off on many Macs and is the most common reason a healthy drive seems to be missing.

2. Answer the accessory prompt

A Mac laptop with Apple silicon asks "Allow accessory to connect?" the first time it sees a new USB or Thunderbolt device. If the prompt was dismissed, the drive stays disconnected. Unplug it, plug it in again and choose Allow, or change the rule in System Settings → Privacy & Security → "Allow accessories to connect".

3. Rule out the cable, the port and the hub

  • Try another port, and plug the drive straight into the Mac without a hub or a dock.
  • Swap the cable. Many USB-C cables carry power only, and a worn cable is the usual cause of a drive that appears and disappears.
  • A spinning hard disk needs more power than some hubs supply. Use a powered hub or the drive's own power adapter.

4. Ask the hardware whether it sees the drive

Hold Option and choose Apple menu → System Information, then open USB (or Thunderbolt) in the list. If the drive is listed there, the connection is fine and the problem is with the volume. If it is not listed on any port or cable, and it is not listed on another computer either, the drive or its enclosure has failed.

5. Look in Disk Utility, at the device level

  1. Open Disk Utility and choose View → Show All Devices.
  2. Find the drive in the External section. A volume shown in grey is present but not mounted.
  3. Select the grey volume and click Mount.
  4. If Mount does nothing, select the volume and run First Aid, then try Mount again.

6. Mount it from Terminal

Terminal gives a real error message where Disk Utility stays silent. List the disks, find yours by its size, and mount it.

diskutil list external
diskutil mountDisk /dev/diskN

Replace diskN with the identifier from the first command. A drive that was unplugged without ejecting is often being checked in the background, and it mounts by itself when the check ends. On a large disk that can take several minutes.

7. Check the format

  • ExFAT, FAT32, APFS and Mac OS Extended mount normally.
  • NTFS (Windows) mounts read-only: you can copy files off the drive but not onto it.
  • ext4 and other Linux formats, and drives written from a Raspberry Pi or Linux installer image, do not mount at all. They appear in Disk Utility as an unreadable or greyed-out volume.
  • A drive encrypted with BitLocker cannot be opened by macOS without extra software.

If the files matter, stop here and copy them off on a computer that can read the format. Every step below erases the drive.

8. Erase it, or rescue it

When the data is not needed, erase the physical device (not the volume under it) in Disk Utility with the GUID Partition Map scheme and ExFAT or APFS. If Disk Utility answers with "Couldn't unmount disk" or "Erase process has failed", our guide to drives that will not erase covers the Terminal route.

External drive won't erase or unmount: the fix

Restore My USB is our free Mac app for the drives Disk Utility gives up on. It works on external drives only, never the boot disk: it force-unmounts the drive, clears the partition table and formats it to APFS, Mac OS Extended, ExFAT or FAT32, and shows a live log of every command it runs.

Restore My USB